The number of XG7 devices you need depends on your space size, layout, and construction materials. Here's a simple guide to help you determine the right setup for your home or building.
Quick Answer by Home Size
Small to Medium Homes (Up to 2,500 sq ft)
- 1 XG7 device is typically sufficient
- Single or two-story homes with standard construction
- Central placement provides excellent coverage
Large Homes (2,500 - 4,000 sq ft)
- 1-2 XG7 devices depending on layout
- Multi-story homes may benefit from 2 devices (one per floor)
- Long, narrow layouts may need devices at opposite ends
Very Large Homes/Buildings (4,000+ sq ft)
- 2-3+ XG7 devices for optimal coverage
- Multiple floors typically need one device per level
- Complex layouts with many rooms may require additional units
Factors That Affect Coverage
Construction Materials
Materials that reduce WiFi range:
- Concrete walls and floors
- Metal siding or roofing
- Brick construction
- Plaster walls with metal mesh
Materials with minimal impact:
- Drywall and wood framing
- Wood siding
- Standard insulation
Layout Considerations
- Open floor plans = better coverage with fewer devices
- Many interior walls = may need additional devices
- Multiple levels = typically one device per floor
- Detached buildings = separate device likely needed
WiFi 7 Advantages
The XG7's WiFi 7 technology provides:
- Extended range compared to older WiFi standards
- Better wall penetration with advanced signal processing
- 5GHz and 6GHz bands for less interference and better performance
- Smart band steering to optimize device connections
When You Need Multiple Devices
Signs You Need Additional Coverage
- Weak signal in certain areas (less than 2-3 bars)
- Slow speeds in specific rooms or floors
- Connection drops when moving around the house
- Dead zones where devices won't connect
Multi-Story Considerations
- Basement and upper floors often need dedicated coverage
- WiFi signals weaken significantly through floors
- Central stairwell placement can sometimes cover multiple levels
Extending Your Network
Wireless Mesh Extension
- Easy setup - additional XG7 units connect wirelessly
- Automatic configuration with existing network
- No additional wiring required
- For setup details, see: Adding an Extender to Your Network
Wired Extension (Ethernet)
- Best performance with direct ethernet connection
- Connect LAN ports between XG7 devices
- May require ethernet switch for multiple devices
- Ideal for permanent installations
Professional Assessment
DIY Testing Method
- Install your first XG7 in a central location
- Test signal strength throughout your space using your phone's WiFi settings
- Identify weak areas where signal drops below 2-3 bars
- Add additional devices as needed for problem areas
Professional Installation
For complex installations or commercial spaces, consider professional assessment to:
- Analyze building materials and interference sources
- Plan optimal placement for maximum coverage
- Ensure proper wireless uplink between devices
- Test and verify coverage throughout the space
General Guidelines
Start Simple
- Begin with one XG7 and test coverage
- Add devices incrementally based on actual performance
- Monitor usage patterns to identify high-demand areas
Coverage Expectations
- Typical indoor range: 2,000-3,000 sq ft per device in optimal conditions
- Through walls: Range reduces by 25-50% depending on materials
- Between floors: Signal strength drops significantly
Bottom Line
Most homes need 1-2 XG7 devices for complete coverage. Start with one centrally located device and add more based on your actual coverage needs. The XG7's WiFi 7 technology provides excellent range, but physical obstacles and building materials will always affect performance.
Not sure about your specific situation? Start with one device and expand as needed - it's easy to add more XG7 units to your network wirelessly.
Ready to add more coverage? See our "XG7 Design and Placement Guide" for optimal positioning tips.
- CLICK HERE FOR MORE HELP ON SETUP AND TROUBLESHOOTING
- CLICK HERE FOR ALL SUPPORT HELP PAGE
- CLICK HERE FOR ALL XETA DEPARTMENT SUPPORT HELP
CONTACT US:
TECH SUPPORT: support@ xeta.net
GENERAL SUPPORT/ ORDER SUPPORT: hello@ xeta.net
AMBASSADOR SUPPORT: ambassador@ xeta.net